Fire Detection & Extinguishing Solutions
Digital Linear Heat Detector
Confirmed Temperature Initiation (CTI)
Protectowire FiberSystem 8000
Automatic Gas Fire Extinguishing System
Digital Linear Heat Detector is the most widely used linear heat detector in the fire detection industry. It is a continuous heat detector capable of detecting heat anywhere along its length. The sensor cable is comprised of two steel conductors individually insulated with a proprietary heat sensitive polymer. The insulated conductors are twisted together to impose a spring pressure between them, then wrapped with a protective tape and finished with a protective outer jacket.
CTI technology is an enhancement to traditional digital linear heat detection technology and enables short circuit discrimination.
CTI confirms thermal activation of the Digital Linear Heat Detector before an alarm is initiated thereby reducing the incidence of false alarms created by physical damage to the detector. CTI Digital Linear Heat Detectors are the only digital linear heat detectors to feature Short Circuit Discrimination.
The Protectowire FiberSystem 8000 is known throughout the world as one of the reliable and intelligent linear heat detection systems using state of the art fiber optic sensing technology.
The system consists of Type PFS Fiber Optic Sensor Cable and the PTS Controllers with related software. The PTS Series Controllers can be configured for various alarm criteria and can be connected to an approved fire alarm control panel using relay inputs and outputs.
The revolutionary automatic gas fire extinguishing system used to protect enclosed engine areas in cars, buses, racing cars, and is also used in power plants, substations, gas industry and everywhere where there is a risk of fire. The entire system is based on a single polyamid tube with a 18mm diameter and a length of 210 cm, which contains a compressed gas extinguishing compound. In the event of a fire the system automatically turns on and extinguishes the fire.
Low Pressure Water Mist Systems
Gas Suppression System
Foam Extinguishing Systems
Automatic Water Cannon Equipments
Watermist is a water spray for which the 99% of the total volume of liquid (Dv0.99) is distributed in droplets with a diameter smaller than 1000 microns at the minimum design operating pressure of the water mist nozzle.
VID Fire-Kill is a world leading low pressure watermist and waterspray manufacturer offering fully approved products for Onshore and Offshore applications.
Gaseous fire suppression is a term to describe the use of inert gases and chemical agents to extinguish a fire. Also called clean agent fire suppression.
ABT Consulting can supply international stands gas suppression system for your Fire Protection Project Requirements.
Extinguishing foam is essentially a mixture of water, foaming agent and air. The mixture ratio of these three substances is adapted depending on the application. The extinguishing effect comes from the heat-resistant foam forming a solid blanket over the flammable materials. This creates a cooling, separating and suppressive effect depending on the type of foam. The foam isolates the flames from the oxygen supply and suppresses the development of toxic flue gases. The chemical reaction for combustion is therefore halted and the flame is extinguished.
Automated Water Cannon Equipment fitted with fire sensors unit, prepares you for any fire harzard and ensures safety of life and valuable assets.
We also deal in various other specialized products like Automatic (Motorized) Long Range Foam Cum Water Monitor and Automatic DCP System. All products are UL and FM Certified.
(c) 2015 ABT Engineering & Consulting Services. All Rights Reserved. I Terms & Conditions I Privacy Policy I Home I About I Markets I Products I Contact I
Site Managed by 'moments & mapping'